Product Description

Product overview
2910 is a one-component functional sealing adhesive glue, has a very low coefficient of thermal expansion and contraction, resistance to high pressure breakdown, UL94 flame retardant standard meet the long-term use of reliability requirements
Are widely used in the semiconductor power device, electric heaters, heat temperature and grateful, light display and electronic device electronic apparatus such as heat resistance pressure to demand higher module, etc
Product features
High stability matrix, and the thermal cycle under the conditions of use for a long time.
High bonding strength, especially suitable for different materials such as metals, ceramics, glass glue.
Curing optimum put fewer calories, low shrinkage rate, to meet the technological requirements of precision device.
Has excellent water resistance and acid and alkali.


Color appearance
White colloidal visual
Viscosity @ 25
20000 Brookfield DV - 3
The density of @ 25
1. 3 g
1.25 g of ISO 1183
Thermal expansion coefficient
Below the Tg
Above Tg


64-6
220-6




The glass transition temperature
80 ℃ ISO 1183
Shaw hardness
86 the ISO 868
Shear strength (steel)
8.4 MPa ISO 4587
Working temperature
- 60-500 ℃ for a long time
Compressive strength
4000 v / 1 mm
500 v / 0.1 mm IEC60093
The volume resistance
> 4.4 X10X1016 Ω. Cm IEC60093
The use of low cost, high cost performance.
Easy to operate high applicability, suitable for automatic dispensing, stencil printing manual art fixed point such as glue.
Good compatibility, material matrix can be long-term storage at room temperature.
Instructions for
Surface oil pollution will seriously affect the glue and adhesive curing effect, even lead to completely unable to bonding and fall off
Check two before (1) adhesive bonding surface, residual oil, dirt or impurities such as flux
(2) use the clean cloth to wipe bonding surface is stained with alcohol


Curing conditions
Cure time


45 minutes @ 60 ℃


Operating time
  
30 minutes @ 80 ℃
@ 25 ℃ for 24 hours






Before use, please release to room temperature, fan speed but can't heating.
Remove the hose from freezer, please don't hand hose, please take from the hose end plug,
Thaw hose to erect, not lying, thawed once exhausted, avoid repeated thawing.
Storage temperature


Storage temperature
Shelf life
< 5 ℃ sealed away from light
6 months
< - 10 ℃ sealed away from light
Nine months
















Product should be stored in a sealed away from light and temperature controlled conditions, due to storage temperature is higher than 5 ℃
Product failure, hui company does not bear the resulting loss and responsibility.Product should be stored